How to write a PED exception request for your SSO or Authorizing Official
Getting a redacted tablet approved for a controlled facility is 50% hardware and 50% paperwork. Use this structure to submit a clean, complete PED introduction package on the first try.
To clear a Special Security Officer (SSO) or Authorizing Official (AO) review on the first submission, a Portable Electronic Device (PED) exception package must include five elements: a closed-loop mission CONOP, a component-by-component physical modification table, US chain-of-custody attestation, a visual guard-inspection protocol, and per-serial Certificates of Redaction with internal board photos.
- Accreditors reject PED requests that use ambiguous language like 'cameras and wireless disabled' without specifying board-level excision.
- Your CONOP must define how data and power enter the tablet (e.g., dedicated media-controlled USB-C station) and where the unit is stored.
- Guards at entry control points need a visual way to distinguish an approved redacted tablet from a personal device—solved by sealed apertures and serialized QR tags.
- Attaching CBR Labs' Certificate of Redaction and four-stage photo packet closes technical reviewer questions upfront.
Even when a tablet has had every camera, microphone, speaker, and wireless radio physically removed at the silicon level, it still crosses the facility threshold on paper before it crosses it in a technician's hand. Special Security Officers (SSOs) and Authorizing Officials (AOs) reject Portable Electronic Device (PED) packages every week—not because the hardware is unsafe, but because the submission package is vague.
Below is the exact five-part structure that consistently clears security review without multiple rounds of RFIs.
1. Mission justification and operational boundary
Start by stating what the tablet does, where it lives, and how data enters and leaves it. Accreditors want to see a closed loop.
Device will be used exclusively within Room [X] for offline technical manual review. Device is permanently assigned to the facility, stored in GSA-approved container [Y] when not in use, and updated only via dedicated, media-controlled USB-C transfer workstation.
2. Hardware modification table (component-by-component)
Never write 'all wireless and recording features disabled.' List every prohibited subsystem and state the physical modification method:
- Front & Rear Cameras: CMOS sensors and lens assemblies physically removed from logic board; optical apertures plugged and sealed.
- Microphone Array: All MEMS microphone capsules physically desoldered from audio bus; acoustic ports sealed.
- Audio Output (Speakers): Internal speaker drivers physically removed.
- Wi-Fi & Bluetooth: RF combo module physically removed from logic board; antenna feeds severed.
- Cellular / GPS / NFC / UWB: Baseband modem, GNSS receiver, and near-field controllers physically removed or absent on base SKU.
3. Supply chain and chain-of-custody attestation
Document where the modification occurred and who touched the unit. State that redaction was performed at CBR Labs LLC (Alexandria, VA; CAGE 14Y35, UEI K4MZG4KC1MY9) by background-checked US personnel, with zero network connection during work and full intake-to-packout event logging.
4. Visual identification and periodic inspection plan
Explain how a guard or security officer can distinguish this redacted tablet from an unmodified personal iPad at a glance. Reference the tamper-evident CBR Labs asset sticker, the QR verification code, and the sealed camera apertures.
5. Appendix: Certificate of Redaction and internal photo packet
Attach the serial-numbered Certificate of Redaction and the four-stage photographic evidence packet for each unit in the lot. When the SSO can see the serial number on the chassis matched to the serial number on the certificate and the open-board photos, approval becomes routine.
Common mistakes that cause SSOs and AOs to kick back PED packages
Having supported dozens of accreditation packages across DoD, IC, and federal civilian agencies, our engineering team sees the same four documentation pitfalls delay approvals by months:
- Mistake 1 — Using software verbs for hardware work: Writing that cameras or radios are 'disabled' or 'deactivated' invites the reviewer to assume a reversible firmware or MDM toggle was used. Always use explicit physical terms: 'physically excised from the logic board,' 'desoldered,' and 'apertures plugged flush.'
- Mistake 2 — Omitting speaker coil microphonics: Many draft CONOPs request camera and microphone removal but forget to address internal speakers. If your facility prohibits all acoustic transducers, specify that internal speaker drivers are also physically removed.
- Mistake 3 — No plan for how files get onto the tablet: If a tablet has zero wireless radios, the accreditor will immediately ask how technical manuals or updates reach the device. Explicitly specify your media-controlled USB-C transfer workstation or enclave Ethernet dock.
- Mistake 4 — Submitting generic vendor brochures instead of serial-level proof: An SSO approves specific serial numbers, not a concept. Always attach the unit-level Certificate of Redaction and PCB photo packet.
Copy-ready technical attestation block for your CONOP
You can drop the following technical attestation paragraph directly into Section 2 of your facility PED exception request or System Security Plan (SSP):
Each tablet covered by this request has undergone permanent, irreversible hardware redaction at CBR Labs LLC (Alexandria, VA · CAGE 14Y35 · UEI K4MZG4KC1MY9). All front and rear camera modules, MEMS microphone capsules, internal speaker drivers, and wireless RF transceivers (Wi-Fi, Bluetooth/BLE, UWB, NFC, cellular baseband, and GNSS/GPS) have been physically excised from the logic board. Optical and acoustic apertures are sealed flush. Each unit is accompanied by a serial-numbered Certificate of Redaction, four-stage open-chassis photographic evidence, and an unbroken US chain-of-custody log.
PED Exception Package Checklist for ISSMs and FSOs
| Package Section | What the Accreditor Checks | Artifact Provided by CBR Labs |
|---|---|---|
| 1. Device Identification | Make, model, A-number/SKU, OEM serial number, facility asset tag | Itemized packing manifest + CBR-YYYY-NNNN tag per unit |
| 2. Transducer/Radio Matrix | Physical removal method for cameras, mics, speakers, Wi-Fi, BT, Cell/GPS | Signed Certificate of Redaction listing every excised subsystem |
| 3. Visual Proof of Removal | Verification that silicon is absent from the PCB, not just toggled off | 4-stage high-res photo packet (intake, open pre, open post, pack-out) |
| 4. Supply Chain Provenance | US facility, vetted technicians, no foreign subcontracting | Chain-of-custody event log with timestamps & Alexandria, VA CAGE 14Y35 |
| 5. Field Re-Verification | How guards or auditors re-verify the unit during periodic inspections | Tamper-evident asset label + QR code resolving to /v verification record |
Frequently asked questions
Can CBR Labs provide a sample Certificate of Redaction before we purchase hardware?
+
Yes. We routinely provide anonymized sample Certificates of Redaction and representative board photography so ISSMs and FSOs can socialize the format with their SSO or AO prior to procurement.
Should we submit one PED package per tablet or one package for the entire lot?
+
Most SSOs prefer a single master PED CONOP and approval memo for the tablet model/profile, with an attached appendix containing the individual Certificates of Redaction and serial numbers for each unit in the lot.
What happens if an accreditor asks for a random physical teardown inspection?
+
Because every component is physically removed from the logic board, your government quality assurance or security representative can open any unit in the lot and visually confirm the vacant component pads.
How should we handle battery charging inside the SCIF in our PED CONOP?
+
Specify that tablets will be charged using inspectable, data-blocked power supplies (or dedicated facility-approved USB-C charging bricks that never leave the SCIF) connected to non-classified convenience power.
What if a redacted tablet needs to be removed from the SCIF for disposal or maintenance?
+
Follow your facility's standard media and hardware sanitization procedure under ICD 705 / NIST SP 800-88, logging the device's CBR Labs tag and OEM serial number out of the facility PED register.
Written and reviewed by Rob Pfleghardt and the bench engineering team at CBR Labs LLC (5927 Tilbury Road, Alexandria, VA 22310). CBR Labs is an active SAM.gov-registered Woman Owned Small Business (CAGE 14Y35 · UEI K4MZG4KC1MY9) performing permanent, board-level hardware redaction on iPad and Android tablets.
Technical guidance for Facility Security Officers (FSOs), ISSMs, SAPSOs, and defense primes deploying hardware-redacted iPads and Android tablets under ICD 705, DoDM 5205.07, CMMC 2.0, and ITAR.
ITAR & EAR manufacturing floors: stopping unauthorized photography on shop tablets
Using wired Ethernet and USB-C workflows on zero-RF redacted iPads
FedRAMP and tablet redaction: what compliance teams need to know
ICD 705 and tablets: what's actually allowed in a SCIF
Need a sample artifact packet for your SSO?
We will send an anonymized Certificate of Redaction and photo packet so your security office can pre-approve the format.