Forensic labs and evidence intake rooms: selective redaction for law enforcement tablets
Digital forensics labs and property/evidence vaults have unique RF and optical rules. How agencies use selective hardware redaction—keeping cameras for evidence logging while removing radios, or vice versa.
Digital forensics laboratories and evidence intake vaults often require selective hardware redaction rather than full removal: RF-shielded labs need zero-RF tablets that retain rear cameras for bench evidence photography, while secure interview and polygraph suites need zero-camera, zero-microphone tablets that retain enterprise Wi-Fi.
- CBR Labs supports custom per-component redaction matrices across all six hardware categories.
- For RF-shielded mobile forensics labs, removing Wi-Fi, Bluetooth, and cellular while keeping the rear camera prevents RF noise inside the Faraday enclosure.
- For interview and polygraph rooms, removing cameras and microphones while keeping Wi-Fi prevents duplicate/unauthorized recording.
- Every unit's Certificate of Redaction itemizes both the excised components and the retained capabilities.
Not every secure facility wants all six components removed. In law enforcement digital forensics labs, crime-scene processing bays, and property/evidence vaults, the operational requirement is often selective: either the room must be RF-quiet so seized devices cannot receive remote wipe commands, or the room allows internal Wi-Fi for barcode inventory while banning microphones and external cellular radios.
Because CBR Labs performs per-component board-level redaction, agencies can specify the exact hardware matrix their Standard Operating Procedure (SOP) requires.
Scenario A: The RF-shielded digital forensics lab
Inside an RF-shielded forensics lab, examiners often want a reference tablet to photograph physical evidence tags and serial numbers at the bench, but cannot allow any device inside the enclosure that radiates Wi-Fi, Bluetooth, or cellular signals.
For this workflow, we retain the rear camera module and remove all wireless silicon (Wi-Fi, Bluetooth, cellular, GPS, NFC, UWB) and microphones. Photos are exported strictly via wired USB-C.
Scenario B: High-security interview and polygraph suites
Conversely, in interview rooms or administrative intake areas where recording is strictly governed by dedicated room equipment, agencies require cameras and microphones physically excised while keeping managed Wi-Fi for real-time records management system (RMS) entry.
- Custom component matrix: Choose any subset of Cameras, Microphones, Speakers, Wi-Fi, Bluetooth, and Cellular/GPS Antennas.
- Itemized certification: The unit's Certificate of Redaction explicitly lists which components were removed and which were retained per customer scope.
Bench engineering for selective law-enforcement profiles: keeping the rear camera while killing RF
Digital forensics laboratories—such as ICAC task forces, sheriff crime labs, and federal electronic crimes units—operate inside RF-shielded Faraday enclosures or screen rooms so seized smartphones cannot receive remote cellular/Wi-Fi wipe commands while on the extraction bench.
Examiners inside that screen room still need a tablet to photograph physical condition, cracked screens, SIM card ICCID numbers, and evidence bag barcodes—yet bringing a Wi-Fi or Bluetooth-emitting tablet inside the Faraday room pollutes the RF environment and violates lab accreditation standards (ISO/IEC 17025). CBR Labs solves this by excising all wireless RF silicon (Wi-Fi, Bluetooth, UWB, NFC, cellular, GPS) and microphones while leaving the rear high-resolution camera and autofocus assembly 100% functional.
- RF-Quiet Bench Camera Profile: Rear camera retained for macro evidence photos; front camera, all microphones, and all wireless transceivers physically removed.
- Interview / Polygraph Room Profile: All cameras and microphones removed so the tablet cannot create a secondary uncalibrated recording; Wi-Fi retained for RMS access.
- Wired USB-C Evidence Transfer: Condition photos are pulled off the forensic tablet directly onto the lab workstation via USB-C cable.
ISO/IEC 17025 & chain-of-custody documentation for crime labs
Forensic lab directors can place CBR Labs' documentation directly into their quality assurance manual:
- Per-unit Certificate of Redaction: Documents the exact selective matrix (e.g., 'RF & Audio Removed; Rear Optical Sensor Retained per Lab SOP').
- Open-board photographic verification: Proves to lab accreditors that the Wi-Fi/BT and cellular transceivers were physically desoldered from the PCB.
- Spectrum verification at lab intake: Confirm zero RF emissions inside the screen room prior to placing the tablet in service.
Selective Redaction Profiles for Law Enforcement & Forensics
| Facility Zone | Components Physically Removed | Components Retained | Primary Operational Goal |
|---|---|---|---|
| RF-Shielded Digital Forensics Lab | Wi-Fi, Bluetooth, Cellular, GPS, NFC, UWB, Microphones | Rear Camera + USB-C | Bench evidence photography inside RF-quiet enclosure |
| Interview / Polygraph Suite | Front/Rear Cameras, Microphones | Enterprise Wi-Fi + Touch Display | RMS/case lookup without unauthorized room recording |
| Property & Evidence Vault | Microphones, Cellular, Bluetooth | Rear Camera + Plant Wi-Fi | Barcode/condition logging without off-network egress |
| Tactical / Undercover Brief Room | Full Six (Cameras, Mics, Speakers, All RF) | Display + USB-C Only | Zero-capture, zero-emission briefing tablet |
Frequently asked questions
Can we order two different redaction profiles on the same purchase order?
+
Yes. Many agencies specify multiple profiles on a single PO (for example, 10 units of Profile A for the forensics lab and 20 units of Profile C for intake). Each device's Certificate of Redaction and asset tag reflects its exact build.
If we keep the rear camera for evidence intake photos, can the front selfie camera still be removed?
+
Yes. Front and rear camera modules are separate assemblies on the logic board; we can remove the front camera and TrueDepth array while leaving the rear camera intact.
How are photos transferred off a zero-RF forensic lab tablet?
+
Technicians connect the tablet via USB-C to the forensic workstation and import photos directly using Image Capture, Windows Explorer, or MTP.
Does removing the microphone affect taking still photographs of evidence on the tablet?
+
No. Still photography in the Camera app (and third-party evidence apps) works identically with all microphones removed; even if someone accidentally switches the Camera app to 'Video' mode, it captures silent video with zero audio track.
Can the LED flash on the back of the tablet be kept to illuminate evidence serial numbers?
+
Yes. When the rear camera is retained for forensic bench photography, we preserve the rear True Tone / LED flash circuit so examiners can illuminate dark ports and serial labels.
Written and reviewed by Rob Pfleghardt and the bench engineering team at CBR Labs LLC (5927 Tilbury Road, Alexandria, VA 22310). CBR Labs is an active SAM.gov-registered Woman Owned Small Business (CAGE 14Y35 · UEI K4MZG4KC1MY9) performing permanent, board-level hardware redaction on iPad and Android tablets.
How state Departments of Corrections (DOCs), county detention centers, federal defenders, trial courts, and forensic labs eliminate contraband recording and wireless access through silicon-level redaction.
Correctional facility tablets: why inmates bypass MDM and why silicon removal works
Attorney-client privilege at the detention center: tablets for in-custody discovery review
Digital evidence in the jury room: configuring zero-RF, zero-capture deliberation tablets
Grand jury chambers and sensitive witness review: enforcing Rule 6(e) secrecy on tablets
Need a custom selective redaction profile?
Tell us which components your SOP requires removed and which must remain active.